Cure Your Garage Door Blues

Often your garage door does not work the way it should. For easy problems, you can do some of the corrections yourself. Here are some typical garage door problems and their solutions.

Does your garage door go up and down by itself? Weird isn\’t it? The explanation is actually easy. There is undoubtedly somebody in your community that makes use of a security or access code similar to the one you are making use of. This can easily trigger interference with the receiver in the opener. Radios in police cars and planes even have the same result. How do you make sure this does not happen again? Typically altering your code will possibly solve the issue.

Current styles of garage door openers don\’t have this issue. It is not cost effective to change your opener because your code is compromised however if the door opens by itself regularly, even after your have actually changed the code several times, you may consider it.

The procedure for altering a safety or access code varies from one garage door opener to another. As a general rule, you just have to hold the transmitter close to the opener\’s box and push a certain transmitter button for thirty seconds. You can easily consult your manufacturer\’s handbook to discover exactly what button to hold down. A lot of openers that are brand-new styles are equipped with a rolling code that alters immediately when the transmitter is utilized.

Does your garage door goes halfway down and back up when you try to close it? In this situation, you might be making use of a garage door that has a protection sensing unit system. The system detects if there are any blockages to the door coming down. Your door immediately uncovers once again when it senses anything in its path. Just take out the obstacle and your door must once again work perfectly.

This issue might even happen if your sensing unit\’s lenses are grubby, messy or have a condensation build up. The system will think that something is in the way and the door not to close.

What if nothing occurs when you press the transmitter? If you notice that your transmitter is not working, you might wish to change the battery on your remote. If you are using your wall button, look for the power source to see if it is working. If this does not repair it, your transmitter might be damaged and has to be replaced.